2014 2015 Kia Sorento Radio Stereo Audio Amplifier Amp OEM 96370-1UAA0

Product Description

The 96370-1UAA0 is an OEM (Original Equipment Manufacturer) audio amplifier specifically designed for the 2014 and 2015 Kia Sorento.¹ This amplifier is a key component of the vehicle's audio system, particularly when it's equipped with the JBL premium sound system.²

Key Information about the Amplifier:

Part Number: 96370-1UAA0 (also seen as 96370-1UAA0 in some listings)³
Vehicle Fitment:
- Make: Kia
- Model: Sorento⁴
- Years: 2014, 2015⁵
- Trims: EX, LX, Limited, SX (for both 2.4L L4 and 3.3L V6 engine options)⁶
Function: It amplifies the audio signal from the head unit (radio/stereo) and sends it to the various speakers throughout the vehicle, providing the power and clarity for the sound system. If your Sorento has the upgraded JBL system, this is likely the amplifier for it.
Location: While the exact location can vary slightly, amplifiers in vehicles are often found under a seat (driver or passenger), in the trunk/cargo area behind a panel, or sometimes integrated into the dashboard assembly behind the radio. For the Sorento, it's typically in the cargo area or under one of the front seats.
MSRP: A new OEM amplifier can be quite expensive, often ranging from $800 to over $1200 from Kia parts retailers.⁷ This is why buying a tested used OEM part is a common and more affordable solution for replacement.

Common Issues Associated with Car Amplifiers (including this one):

If your 2014-2015 Kia Sorento's audio system is experiencing problems, the amplifier could be a culprit. Common symptoms of a failing amplifier include:

No Sound from Speakers: The most common sign. If the radio/head unit appears to be on and functioning, but no sound comes out of any speakers, the amplifier is a prime suspect.
Intermittent Sound: Audio cuts in and out randomly. This could be due to the amplifier overheating and shutting down (often a protective measure), or loose connections.
Distorted or Poor Sound Quality: Muffled sound, static, crackling, or a significant decrease in clarity from some or all speakers.
One or More Channels Out: If only certain speakers are not working, it could indicate a failed channel within the amplifier.
Burning Smell: In severe cases, an overheating or failing amplifier might emit a burning smell.
System Turning On/Off Randomly: The entire audio system might power cycle if the amplifier is experiencing severe issues.

Troubleshooting Steps (before replacing):

Check Fuses: A blown fuse can cause the amplifier to stop receiving power. Consult your owner's manual for the location of the audio system/amplifier fuse(s) in both the interior and under-hood fuse boxes.
Hard Reset: Disconnecting the negative battery terminal for 15-30 minutes can sometimes resolve software glitches that might affect the amplifier.
Inspect Wiring/Connections: Look for any visible damage, corrosion, or loose connections at the amplifier and main head unit.

If you are experiencing any of the sound issues mentioned above and have confirmed that the fuses are good and speakers are connected, replacing the amplifier with a compatible OEM unit like the 96370-1UAA0 is often the solution. It's particularly important to ensure you get the correct part number, especially if your Sorento has the premium JBL sound system.