- Home
- SWITCHES & CONTROLS
- Window switches
- 2015 2023 Dodge Challenger Radio Navi 8.4 Screen CarPlay Android Bezel USB Hub
Product Description
Following your specific format and instructions, here is the optimized eBay listing for your Dodge Challenger 8.4" Uconnect 4C NAV radio, CarPlay/Android Auto USB hub, and dash bezel upgrade bundle.
Technical/Fitment Note: This genuine factory-original 8.4-Inch Uconnect 4C NAV Touchscreen Media Receiver with Apple CarPlay & Android Auto Upgrade Kit (including the updated Media Hub with dual USB ports and Challenger dash bezel) is manufactured by Panasonic / Mopar for the LA-chassis Dodge Challenger platform. It is engineered explicitly for 2015–2023 model lines (covering SXT, GT, R/T, Scat Pack, SRT Hellcat, and Demon models looking to upgrade from earlier unequipped/non-CarPlay radios or replace failed touchscreens).
Please note a critical hardware configuration for this listing: this component set carries Mopar root part series 68331631 / 68306380 / 68306381 (such as 68331631AV, 68306380AA, or 68306381AA). Upgrading older 2015–2016 factory systems to Apple CarPlay / Android Auto requires substituting both the main 8.4" screen display receiver and the lower center console USB/Aux Media Hub (included in this bundle) to allow high-speed data pass-through.
Title
2015 2023 Dodge Challenger Radio Navi 8.4 Screen CarPlay Android Bezel USB Hub
Product Details
| Attribute | Information |
| Part Name | Uconnect 4C NAV 8.4" Screen Receiver, Dash Bezel & Apple CarPlay/Android Auto USB Hub Kit |
| OEM Mopar Part # | 68331631AV / 68306380AA / 68306381AA (68331631 / 68306380 Series) |
| Placement on Vehicle | Center Dashboard Interior Stack & Center Console Media Port Cavity |
| Infotainment Architecture | Uconnect 4C NAV with Factory GPS, Apple CarPlay & Android Auto |
| Included Components | 8.4" Touchscreen Display Receiver, Challenger Dash Bezel, Dual USB Hub |
| Chassis Platform | LA Platform (Dodge Challenger All Trims) |
| Fitment Type | Direct Replacement Mechanical Bolt-In & Harness Plug |
| Fitment Years | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| Condition | Used OEM (Original Equipment Manufacturer) |
Description
This is a genuine OEM Mopar Uconnect 4C NAV 8.4-Inch Touchscreen Receiver, Challenger Trim Bezel, and High-Speed USB Media Hub Upgrade Bundle removed from a running 2022 Dodge Challenger R/T Scat Pack. Carrying exact Mopar part sequence 68331631 / 68306380, this full infotainment package is an ideal direct physical, mechanical, and electronic replacement or retrofit to instantly add factory Apple CarPlay and Android Auto capabilities to 2015–2016 models or resolve common touchscreen issues like digitizer delamination (sticky/bubbling screen), non-responsive touch zones, black screen freeze, or lost GPS navigation.
As an authentic factory-original component bundle, this setup features factory mounting points, clean multi-pin electrical harness docks, and the updated console dual-USB media hub required to communicate with Apple CarPlay and Android Auto protocols. Opting for a genuine Mopar OEM unit ensures full compatibility with factory SRT Performance Pages, Drive Modes, backup cameras, climate control display menus, and steering wheel audio buttons. Every touch digitizer zone, Bluetooth module, navigation GPS lock, USB data line, and backlighting circuit has been fully bench-tested and operates flawlessly.
Vehicle Compatibility
Please precisely verify your original dashboard layout and anti-theft unlock code requirements before purchasing. This unit fits:
Dodge Challenger (SXT, GT, R/T, R/T Scat Pack, T/A, SRT 392, SRT Hellcat, Hellcat Redeye, Demon): 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Application & Retrofit Warning: On 2015–2016 vehicles upgrading from Uconnect 3 (RA3/RA4 non-CarPlay systems), you MUST swap out the old console USB hub for the updated USB hub included in this kit for Apple CarPlay and Android Auto to activate. A 4-digit anti-theft radio unlock PIN code (provided/included with sale) or dealer PROXI alignment may be required depending on your vehicle's BCM configuration.
Important Installation Information
Direct Mechanical Bolt-In & Harness Integration: Replacing this center radio stack requires standard hand tools. Gently unclip the front center dash trim bezel using a soft plastic pry wedge tool. Remove the retaining screws securing the radio receiver chassis, pull the unit forward, disconnect the rear electrical harness blocks and FAKRA antenna leads, swap over the screen receiver and included USB console hub, reconnect all harness lines securely, and clip the dash bezel back into place.
Key Features
100% Delamination-Free Screen: Screen glass is completely smooth and free of sticky gel leaks, air bubbles, or touchscreen digitizer dead spots.
Included High-Speed USB Hub: Features the required updated media hub module to enable seamless Apple CarPlay / Android Auto phone projection.
Fully Tested Internal Systems: Tested for fast GPS signal lock, Bluetooth phone pairing, HD radio reception, and backup camera signal pass-through.
Corrosion-Free Terminal Docks: All rear multi-pin connector docks and FAKRA antenna ports are clean, straight, and unbent.
Shipping & Handling
Packaging: Shipped securely inside a thick, heavy-duty structural box packed heavily with anti-static bubble wrap and soft foam layers to ensure the touchscreen glass, rear aluminum heat sink, front bezel, and media hub arrive completely pressure-isolated, shock-protected, and pristine.
Handling: Ships within 1 business day.
Loading... Please wait...






