2016 2019 Ford Explorer Left Driver Side Headlight Halogen LED OEM JB5313006BM

Following your exact format and instructions, here is the optimized eBay listing for your 2016–2019 Ford Explorer Left (Driver Side) Headlight Assembly (OEM Part # JB53-13006-BB / JB5Z-13008-B).

Technical/Fitment Note: This genuine factory-original Front Left (Driver Side) Headlight Assembly is manufactured by Ford Motor Company / FoMoCo for fifth-generation U502-chassis Ford Explorer SUVs. It is engineered explicitly for 2016–2019 model line applications (covering Base, XLT, Limited, Sport, and Platinum trim levels equipped with 2.3L EcoBoost I4, 3.5L Cyclone V6, or 3.5L EcoBoost V6 powertrains).

Please note a critical hardware configuration for this listing: this component corresponds to Ford OEM primary part series JB5Z-13008-B / JB53-13006-BB (frequently stamped on the housing sticker as JB53-13006-BB, JB53-13005-BB, or JB53-13W029-BB, superseding or interchanging with FB5Z-13008-A, FB5Z-13008-C, and JB5Z13008B). Positioned on the front left (driver side) of the vehicle, this composite headlamp housing incorporates factory low-beam LED lighting, halogen high-beam optics, and integrated signature LED daytime running lamps (DRL).

Title

2016 2019 Ford Explorer Left Driver Side Headlight Halogen LED OEM JB5313006BM

Product Details

Description

This is a genuine OEM Ford Front Left Driver Side Factory LED/Halogen Headlight Assembly removed from a running 2018 Ford Explorer XLT 3.5L V6. Finished with its factory-original clear outer lens and black/chrome interior accent frame and carrying exact OEM part sequence JB53-13006-BB / JB5Z-13008-B, this complete lighting assembly is an ideal direct physical, mechanical, and electronic drop-in replacement to instantly resolve common front-end issues including collision damage, cracked outer lenses, internal moisture fogging, broken mounting tabs, or complete low beam LED failure.

As an authentic factory-original component, this headlight assembly features precisely molded factory structural mounting tabs, alignment pins, and clean multi-pin electrical harness connector docks designed to sit completely flush with your Explorer's front bumper cover, fender, and grille lines. Opting for a genuine Ford OEM headlamp ensures exact beam patterns, proper leveling geometry, and seamless CAN-bus electrical integration. Every internal LED low beam circuit, daytime running light element, turn signal socket, and housing weather-seal has been fully bench-tested and operates flawlessly.

Vehicle Compatibility

Please precisely verify your original headlight's part number sticker and connector configuration before purchasing. This driver-side headlight assembly fits:

• Ford Explorer SUV (Base, XLT, Limited, Sport, Platinum - 2.3L EcoBoost & 3.5L V6): 2016, 2017, 2018, 2019

• Application Warning: This headlight is configured strictly for 2016–2019 U502 facelifted Ford Explorer models matching part series JB53-13006-BB / JB5Z-13008-B. It will NOT fit 2011–2015 pre-facelift Explorer models due to completely different headlight lens shapes, front grille cutouts, and bumper profiles. It will NOT fit 2020+ sixth-generation (U625) Explorer models.

Important Installation Information

• Direct Mechanical Bolt-In & Harness Integration: Replacing this front left headlight assembly requires basic hand tools. Gently unbolt and release the front bumper cover fascia and inner fender liner clips to gain access to the lower headlight mounting bolts. Remove the retaining screws, pull the headlamp assembly forward, disconnect the main electrical harness plug, swap the assembly over, reconnect the wiring securely, re-tighten all chassis bolts, and clip the bumper fascia back into place.

Key Features

• Fully Tested Illumination: LED low beam projectors, signature C-clamp DRL accents, and halogen high beam optics have been bench-tested for bright, steady light output.

• Intact Mounting Tabs & Posts: All factory structural mounting ears, lower support brackets, and alignment pins are original, intact, and uncracked for firm, vibration-free installation.

• Clear Polycarbonate Lens: Outer lens surface is clear, clean, and structurally sealed against water leaks and internal condensation.

• Clean Cosmetic Condition: Clean and well-preserved OEM housing showing only light, standard signs of highway use (such as minor micro-pitting) consistent with careful vehicle operation.

Shipping & Handling

• Packaging: Shipped securely inside an oversized, thick, heavy-duty structural box surrounded by thick foam layers and shock-absorbing bubble wrap to isolate all fragile mounting tabs, outer lens corners, and rear housing docks from transit damage.

• Handling: Ships within 1 business day.