20192021 Ford EcoSport 8" Radio Navigation Information Display Screen W/ Bezel

Technical/Fitment Note: This genuine factory-original 8-Inch SYNC 3 Touchscreen Information & Navigation Display Screen Assembly with Integrated Surround Trim Bezel is manufactured by Ford Motor Company / FoMoCo for second-generation B515-chassis Ford EcoSport subcompact crossover SUVs. It is engineered explicitly for 2019–2021 model line applications (covering SE, SES, and Titanium trim levels equipped with 1.0L EcoBoost I3 or 2.0L Duratec I4 powertrains and factory 8-inch SYNC 3 infotainment systems).

Please note a critical hardware configuration for this listing: this component corresponds to Ford OEM primary root part series GN1Z-10D885 / GN1Z-18B955 / JK1T-18B955 (frequently stamped on the rear screen casing as GN1Z-10D885-A, GN1Z-18B955-A, JK1T-18B955-AA, or GN1B-10E889-series, superseding or interchanging with GN1Z10D885A and GN1Z18B955A). Mounted centrally atop the upper dashboard stack, this floating multi-touch screen module incorporates factory navigation display functions, Apple CarPlay / Android Auto interface channels, backup camera video display, audio controls, and surrounding dash bezel trim framing.

Title

2019 2021 Ford EcoSport Radio Navigation 8 Display Screen W Bezel GN1Z10D885 OEM

Product Details

Description

This is a genuine OEM Ford Center Dash 8-Inch Radio Navigation Touchscreen Display Screen & Bezel Assembly removed from a running 2020 Ford EcoSport SE 2.0L. Finished with its factory-original satin black surround trim bezel and carrying exact OEM part series GN1Z-10D885 / GN1Z-18B955, this primary infotainment display module is an ideal direct physical, mechanical, and electronic drop-in replacement to instantly resolve common interior electronic failures including cracked display glass, unresponsive touch digitizer zones, delaminating screens, black/flickering displays, or broken outer bezel mounting tabs.

As an authentic factory-original component, this screen and bezel assembly features precisely mapped mounting clip tabs and clean multi-pin electrical harness connector docks designed to sit completely flush with your EcoSport's upper dashboard contour. Opting for a genuine Ford OEM touchscreen unit ensures exact resolution scaling, proper CAN-bus communication with your APIM module, and crystal-clear rear backup camera rendering. Every touch response zone, backlighting circuit, and harness connector port on this unit has been fully bench-tested and operates flawlessly.

Vehicle Compatibility

Please precisely verify your original display's part number sticker and screen size before purchasing. This 8-inch navigation/radio screen assembly fits:

• Ford EcoSport SUV (SE, SES, Titanium - 1.0L EcoBoost & 2.0L I4): 2019, 2020, 2021 (also fits 2018 and 2022 models equipped with factory 8" SYNC 3 system matching part series GN1Z-10D885)

• Application Warning: This display assembly is configured strictly for Ford EcoSport models equipped with the factory 8-inch SYNC 3 floating touchscreen system matching part series GN1Z-10D885 / GN1Z-18B955. It will NOT replace S models equipped with the smaller 4.2-inch non-touch monochrome screen due to completely different dashboard cutouts, wiring harnesses, and bracket geometry.

Important Installation Information

• Direct Mechanical Bolt-In & Harness Integration: Replacing this center dash display unit requires basic interior hand tools. Carefully unclip the trim surrounding the screen using a soft plastic pry tool, unbolt the retaining screws securing the display frame to the upper dashboard structure, tilt the assembly forward, disconnect the rear multi-pin LVDS video and power harness plugs, swap the unit over, reconnect all wiring securely, re-tighten the chassis bolts, and snap the trim bezel back into place.

Key Features

• Fully Tested Touchscreen Digitizer: Capacitive touch glass tested across all screen quadrants for instant, accurate tap and swipe responses.

• Flawless LCD Rendering: LCD panel delivers vibrant colors and clear graphics free of dead pixels, burn-in, bleeding, or horizontal lines.

• Intact Trim Bezel & Clips: Plastic surround housing, lower mounting feet, and clip channels are original, intact, and uncracked for a flush dash fit.

• Clean Cosmetic Condition: Glass touch faceplate is clean and well-preserved, showing only light, standard signs of careful interior use.

Shipping & Handling

• Packaging: Shipped securely inside a thick, heavy-duty structural box surrounded by thick anti-static foam layers and heavy bubble wrap to isolate the fragile glass display face, electronic circuit boards, and outer trim bezel from transit impacts.

• Handling: Ships within 1 business day.